Cisco Catalyst 3560-X Series, Software Configuration Manual

Page: 1214 / 1538

1-6
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Configuring Cisco IOS IP SLAs Operations
Configuring IP SLAs Operations
An IP SLAs threshold violation can also trigger another IP SLAs operation for further analysis. For
example, the frequency could be increased or an ICMP path echo or ICMP path jitter operation could be
initiated for troubleshooting.
Determining the type of threshold and the level to set can be complex, and depends on the type of IP
service being used in the network. For more details on using thresholds with Cisco IOS IP SLAs
operations, see the “IP SLAs—Proactive Threshold Monitoring” chapter of the Cisco IOS IP SLAs
Configuration Guide.
Configuring IP SLAs Operations
This section does not include configuration information for all available operations as the configuration
information details are included in the
Cisco IOS IP SLAs Configuration Guide . It does include several
operations as examples, including configuring the responder, configuring UDP jitter operation, which
requires a responder, and configuring ICMP echo operation, which does not require a responder. For
details about configuring other operations, see he
Cisco IOS IP SLAs Configuration Guide :
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/12_4t/sla_12_4t_book.html
This section includes this information:
• Default Configuration, page 1-6
•
Configuration Guidelines, page 1-6
• Configuring the IP SLAs Responder, page 1-7
•
Analyzing IP Service Levels by Using the UDP Jitter Operation, page 1-8
• Analyzing IP Service Levels by Using the ICMP Echo Operation, page 1-11
Default Configuration
No IP SLAs operations are configured.
Configuration Guidelines
For information on the IP SLAs commands, see the Cisco IOS IP SLAs Command Reference,
Release 12.4T command reference:
http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_book.html
For detailed descriptions and configuration procedures, see the Cisco IOS IP SLAs Configuration Guide,
Release 12.4T L:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/12_4t/sla_12_4t_book.html
Note that not all of the IP SLAs commands or operations described in this guide are supported on the
switch. The switch supports IP service level analysis by using UDP jitter, UDP echo, HTTP, TCP
connect, ICMP echo, ICMP path echo, ICMP path jitter, FTP, DNS, and DHCP, as well as multiple
operation scheduling and proactive threshold monitoring. It does not support VoIP service levels using
the gatekeeper registration delay operations measurements.