13
Step 2
Start the terminal emulation session so you can see the output display from the power-on
self-test (POST).
Step 3
On the PC terminal emulation program:
a.
Set the data format to 8 data bits, 1 stop bit, and no parity.
b.
Set the terminal emulation speed to 9600 baud.
c.
Set the flow control to None.
Step 4
Go to the “Waiting for POST to Complete” section on page 16 to finish configuring the blade
switch.
Connecting through the BX600 System Management Blade
Follow these steps to set up the blade switch by connecting to a PC through the BX600 system
management blade console port:
Step 1
Connect one end of a DB9 null-modem or a crossover cable to the RS-232 console serial port
of the associated management blade. Connect the other end of the cable to the RS-232 console
serial port of the PC. (See Figure 7.)
3040GSG.fm Page 13 Monday, September 18, 2006 9:45 AM
