Cisco Catalyst 2960 Series, Configuration Manual

Page: 467 / 2288

Purpose Command or Action
Returns to global configuration mode. end
Example:
Switch(config-if)#
end
Step 4
Enables the access switch to send MAC address-table move updates
to other switches in the network if the primary link goes down and
the switch starts forwarding traffic through the standby link. mac address-table move update transmit
Example:
Switch(config)#
Step 5
mac address-table move update
transmit
Returns to privileged EXEC mode. end
Example:
Switch(config)#
end
Step 6
Related Topics
Configuring the MAC Address-Table Move Update: Examples, on page 389
Monitoring Flex Links, Multicast Fast Convergence, and MAC Address-Table Move Update, on page
386
MAC Address-Table Move Update, on page 377
Restrictions for Configuring Flex Links and MAC Address-Table Move Update, on page 373
Configuring the MAC Address-Table Move Update: Examples, on page 389
Configuring a Switch to Obtain and Process MAC Address-Table Move Update Messages
SUMMARY STEPS
1. configure terminal
2.
mac address-table move update receive
3. end
DETAILED STEPS
Purpose Command or Action
Enters global configuration mode configure terminal Step 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
385
How to Configure Flex Links and the MAC Address-Table Move Update Feature