manualshive.com logo in svg

Cisco Catalyst 2928, Software Configuration Manual

The Cisco Catalyst 2928 is a highly reliable network switch designed to deliver unparalleled performance. With advanced features and seamless connectivity, it empowers organizations with efficient network operations. To maximize its potential, users can easily download the comprehensive Software Configuration Manual for free from our website, manualshive.com.

Share
Download
background image

 

B-32

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Appendix B      Working with the Cisco IOS File System, Configuration Files, and Software Images

Working with Software Images

The algorithm installs the downloaded image onto the system board flash device (flash:). The image is 
placed into a new directory named with the software version string, and the BOOT environment variable 
is updated to point to the newly installed image.

If you kept the old software during the download process (you specified the 

/leave-old-sw

 keyword), you 

can remove it by entering the 

delete /force /recursive 

filesystem

:/

file-url

 privileged EXEC command. 

For

 filesystem

, use 

flash:

 for the system board flash device. For 

file-url

, enter the directory name of the 

old software image. All the files in the directory and the directory are removed.

Caution

For the download and upload algorithms to operate properly, do 

not

 rename image names.

Uploading an Image File By Using RCP

You can upload an image from the switch to an RCP server. You can later download this image to the 
same switch or to another switch of the same type.

The upload feature should be used only if the web management pages associated with the embedded 
device manager have been installed with the existing image.

Beginning in privileged EXEC mode, follow these steps to upload an image to an RCP server:

Command

Purpose

Step 1

Verify that the RCP server is properly configured by 
referring to the 

“Preparing to Download or Upload an Image 

File By Using RCP” section on page B-29

.

Step 2

Log into the switch through the console port or a Telnet 
session.

Step 3

configure terminal

Enter global configuration mode.

This step is required only if you override the default remote 
username (see Steps 4 and 5). 

Step 4

ip rcmd remote-username

 

username

(Optional) Specify the remote username.

Step 5

end

Return to privileged EXEC mode. 

Step 6

archive upload-sw 
rcp:

[[[

//

[

username

@

]

location

]

/

directory

]

/

image-na

me

.tar

] 

Upload the currently running switch image to the RCP 
server. 

•

For 

//

username, s

pecify the username; for the RCP copy 

request to execute, an account must be defined on the 
network server for the remote username. For more 
information, see the 

“Preparing to Download or Upload 

an Image File By Using RCP” section on page B-29

.

•

For 

@

location

, specify the IP address of the RCP server.

•

For 

/

directory

]

/

image-name

.tar

, specify the directory 

(optional) and the name of the software image to be 
uploaded. Directory and image names are case sensitive.

•

The 

image-name

.tar

 is the name of software image to be 

stored on the server.

Summary of Contents for Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2928

Salusfin SF-930EU User'S Installation Manual preview
SF-930EU
Brand: Salusfin Pages: 6
TP-Link ER8411 Installation Manual preview
ER8411
Brand: TP-Link Pages: 2
4G Systems XSBox MOVE Quick Start Manual preview
XSBox MOVE
Brand: 4G Systems Pages: 2
SAB SABVISION NVR32 Quick Start Manual preview
SABVISION NVR32
Brand: SAB Pages: 29
B&B Electronics Elinx ESW200 Series Quick Start Manual preview
Elinx ESW200 Series
Brand: B&B Electronics Pages: 20
Hunter Pro-C Series Programming Instructions preview
Pro-C Series
Brand: Hunter Pages: 2
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
Sun Microsystems McDATA Eclipse 1620 Release Notes preview
McDATA Eclipse 1620
Brand: Sun Microsystems Pages: 9
Planet FNSW-1600P User Manual preview
FNSW-1600P
Brand: Planet Pages: 16
Vivotek ND8212W Hardware Installation Manual preview
ND8212W
Brand: Vivotek Pages: 46
Eaton 9479-ETG-CSL Instruction Manual preview
9479-ETG-CSL
Brand: Eaton Pages: 32
Westermo LRW-112 Series Manual preview
LRW-112 Series
Brand: Westermo Pages: 28
Wieland wienet UMS 5-L Installation Instruction preview
wienet UMS 5-L
Brand: Wieland Pages: 2
Helmholz REX 100 3G Quick Start Manual preview
REX 100 3G
Brand: Helmholz Pages: 20
National Instruments NI ELVIS III Getting Started preview
NI ELVIS III
Brand: National Instruments Pages: 37
Farallon Ethernet ISA Card User Manual preview
Ethernet ISA Card
Brand: Farallon Pages: 20
HP ProLiant DL100 G2 DPSS Administration Manual preview
ProLiant DL100 G2 DPSS
Brand: HP Pages: 155
HP NetStorage 6000 User Manual preview
NetStorage 6000
Brand: HP Pages: 192

Brands by name

Popular brands

Load more brands