40 Asynchronous Transfer Mode Interface Processor (AIP) Installation and Configuration
Configuring the AIP
AIP Statistics
The AIP will maintain a count of certain errors. In addition to keeping a count of these errors, the
AIP will also take a snapshot of the last VCI/VPI that caused an error. Each AIP error counter is 16
bits.
Errors include the following:
•
CRC errors
•
Giants received
•
No buffers available
•
Framing errors
•
Applique/physical layer errors
•
Packet timeout errors on receive
ATM show Commands
You can use the following ATM show commands to display the current state of the ATM network
and the connected VCs:
•
To show current VCs and traffic information, use the show atm vc command, as follows:
Router# show atm vc [vcd]
Specifying a VCD displays specific information about that VCD.
•
To show current ATM-specific information about the AIP interface, use the show atm int
interface command, as follows:
Router# show atm int interface
•
To show current ATM traffic, use the show atm traffic command, as follows:
Router# show atm traffic
The show atm traffic command displays global traffic information to and from all ATM
networks connected to the router.
•
To show the current ATM mapping of the active list of ATM static maps to remote hosts on an
ATM network, use the show atm map command, as follows:
Router# show atm map
