Cisco C880 M4 Service Manual Download

Page: 31 / 132

SET0500000

5 Adding an Internal Hard Disk Drive (HDD) /

Internal Solid State Drive (SSD)

This chapter describes the procedure for adding the internal hard disk drive (HDD) and the internal

solid state drive (SSD) into the disk unit (DU).

In this chapter, HHD and SSD represent the internal hard disk drive and the internal solid state

drive.

SET0501000

5.1 Conditions for Adding Components

SET0501010

5.1.1 Number of mounted internal HDD / SSD

Table 5.1.1 lists the maximum number of HDD / SSD units that can be mounted in the unit.

Table 5.1.1

Mount units

Maximum number of mounted units

Disk Unit(DU)

SET0501020

5.1.2 Conditions concerning combined use of HDD / SSD

- There are no conditions concerning the combined use of HDD / SSD.

SET0501030

5.1.3 Main unit status

- Table 5.1.3 lists whether an SB addition can be added in each main unit status.

Table 5.1.3

Main unit status

Work possible?

- AC power to the main unit is off

(Cold maintenance (AC power off))

Yes

- AC power to the main unit is on

- System Powered Off

(Cold maintenance (standby))

Yes

- AC power to the main unit is on

- System Powered On

(Hot maintenance)

CA92344-0577-01

Summary of Contents for C880 M4





































































































































Search results

Summary of Contents for C880 M4

Reviews:

Related manuals for C880 M4

Brands by name

Popular brands

Cisco C880 M4, Service Manual

Search results

Summary of Contents for C880 M4

Reviews:

Related manuals for C880 M4

Brands by name

Popular brands