11
11
Run the System Setup Wizard
The System Setup Wizard starts automatically when you access
the appliance via the web-based interface (or when you run the
systemsetup
command from the command-line interface.)
Step 1
Start the System Setup Wizard.
Step 2
Accept the end user license agreement.
Step 3
Enter information from the
“Document Network
Settings” section on page 3
.
Step 4
Set anti-spam and anti-virus security settings.
Step 5
Review the configuration summary page.
Step 6
Click
Install this Configuration
.
The appliance may not appear to have accepted your
configuration or be performing the installation. This is
because you have changed the IP address, but the
installation is underway.
Step 7
If you temporarily changed the IP address of your
computer as described in the
“Temporarily Change
Your IP Address for Remote Access” section on page 6
,
change the IP address settings back to the original
values.
Step 8
Ensure that your laptop and the appliance are
connected to the network.
Step 9
Log back in to the appliance with the username
admin
and the new password that you set in the System Setup
Wizard.
The Cisco C690 Email Security Appliance uses a
self-signed certificate that may trigger a warning from
your web browser. You can simply accept the certificate
and ignore this warning.
Step 10
Write down your new administrator password and
keep it in a safe place.
Summary of Contents for C690
Page 18: ...18 ...
