background image

 

 

 

 

BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK 84XX SERIES 

20-BD5605-00 

©

2018 BROADSOFT INC. 

PAGE 29 OF 34 

Appendix A:  Reference 84xx Series Configuration Files 

The following is a reference configuration for the 84xx Series configured for use with 

BroadWorks. 

System File:  000000000000.cfg 

NOTE:  This is an example file and it should be used for reference only. 

# SIP Default Generic Configuration File 

<?xml version="1.0" standalone="yes"?> 

<!-- 

**************************************************************************

* --> 

<!-- * Default Master SIP Configuration File  

* --> 

<!-- *                                                                         

* --> 

<!-- * This file is read by every handset at boot to specify where to load 

its * --> 

<!-- * software from (APP_FILE_PATH), to specify the sequence in which to 

read* --> 

<!-- * configuration files (CONFIG_FILES) and whether to store or retrieve     

* --> 

<!-- * information in specific directories (server root by default)            

* --> 

<!-- 

**************************************************************************

* --> 

 

<MASTER_CONFIG> 

 

    <!-- You can specify a path with subdirectories to specify the 

location of the handset software.  --> 

    <!-- See the Deployment Guide for more information about setting up 

subdirectories. --> 

 

    <SOFTWARE 

        APP_FILE_PATH="sip.ld" 

        /> 

   

    <!-- Information from files on the left overrules information from 

files to their right --> 

    <!-- [PHONE_MAC_ADDRESS]dynamically gets replaced by that handset's 

MAC address --> 

    <!-- For FLAT DEPLOYMENT, create a <macaddress>-ext.cfg for each 

handset following the --> 

    <!-- template provided in this directory --> 

    <CONFIGURATION 

        CONFIG_FILES="[PHONE_MAC_ADDRESS]-ext.cfg, site.cfg" 

        /> 

 

    <DIRECTORIES 

        LOG_FILE_DIRECTORY="" 

        OVERRIDES_DIRECTORY="" 

        CONTACTS_DIRECTORY="" 

        CALL_LISTS_DIRECTORY="" 

        /> 

 

Summary of Contents for BroadSoft BroadWorks Spectralink 84 Series



































Reviews: