6-2
Cisco Broadband Access Center for Cable Installation Guide 2.7
OL-19105-01
Chapter 6 Upgrading Broadband Access Center for Cable
Before You Begin
Before You Begin
The following procedure is required before upgrading all components except the RDU.
Step 1
Untar the upgrade file(27upgrade.tar) onto the computer where the BACC components reside. For
example:
tar -xvf 27upgrade.tar
The component upgrade scripts are extracted to the
patch27/bin
upgrade folder.
Step 2
Run the
backupDb.sh
script to back up the RDU database files. See the
Cisco Broadband Access Center
for Cable Administrator’s Guide
for additional information.
Upgrading the RDU
To upgrade the RDU:
Step 1
Run the
setup.bin
file normally associated with a new installation of BACC. The
setup.bin
file
automatically detects the previous installation.
Step 2
When the installation program prompts you to perform the database migration procedure, run the
migration script using the
migrateDb.sh
script as described in
Migrating the RDU Database, page 6-6
.
Upgrading the Solaris DPE
Complete these steps to upgrade the installed Solaris DPE component from release 2.6.x to release 2.7:
Step 1
Run this script from the upgrade folder:
./27-upgrade-dpe.sh
Step 2
You must manually restart the agent to finish the upgrade process.
An output similar to this displays.
BPR Located
BPR Home directory is /opt/CSCObpr
Current version is 2.6.
(x)
DPE Component Installed
Stopping the BPR Agent
BPR Agent is stopped.
BPR Agent stopped
Copying the Upgrade Files
Upgrading Package Information
Upgrade for BPR 2.7 Completed Successfully
Please start your BPR Agent to finish the upgrade Process