C H A P T E R
B-1
Cisco ATA 190 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-31821-01
B
Voice Menu Codes
This section contains information on accessing the Interactive Voice Response (IVR) and a
quick-reference list of the voice configuration menu options for the ATA 190.
Accessing the IVR and Configuring Your Phone Setting
To access the IVR and configure your phone settings, follow these steps:
Note
You can change the PIN on the Cisco Unified CM User Options web page.
Procedure
Step 1
To access the IVR, go off-hook on the phone connected to Line 1 and press ****.
The IVR prompts for a password.
Note
The ATA 190 allows you to enter only numerical values for password.
Step 2
Enter the PIN by pressing the number keypad, followed by
#
button.
You are at the IVR main configuration menu.
Step 3
Follow the voice prompts on the IVR. See
Table B-1
for information on navigating the IVR.
Step 4
To return to the main configuration menu, press
#
.
Step 5
To exit the IVR, end the call.
Table B-1
describes the various options in the IVR Configuration Menu
Table B-1
Navigating the IVR Configuration Menu
Action
IVR Code
Navigating Notes
Show IP address
110
Configure IP address
111
Availaible in static ip mode only
Show subnet mask
120
