Cisco ASR 1004 Router Memory and Storage Options
The following table lists the hardware memory and storage options supported on the Cisco ASR 1004 Router.
Table 104: Memory and Storage Options for Cisco ASR 1004 Router
Maximum System Support
Default
Memory Type
4 GBDRAM
2 GB DRAM
RP1
For mass storage: hard disk drive 40 GB
or solid-state drive 32Gb support
1 GB (Partitioned: 2x32MB for NVRAM
and the remaining for mass storage
eUSB
Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1004 Router has RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port supports
IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET,
100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors.
Cisco does not supply Category 5 UTP cables; these cables are available commercially. See xref Figure A-1
to see an RJ-45 port and connector.
Cisco ASR 1004 Router MGMT Ethernet Port Signals and Pinouts
The following table lists the RJ-45 port pinouts for the front panel Management Ethernet port.
Table 105: RJ-45 Management Ethernet Port Pinouts for the Cisco ASR 1004 Router
Description
Direction
Signal
Pin
Transmit Data
Output
TX Data+
1
Transmit Data
Output
TX Data
–
2
Receive Data
Input
RX Data+
3
—
—
NC
4, 5
Receive Data
Input
RX Data
–
6
—
—
NC
7,8
Cisco ASR 1000 Series Router Hardware Installation Guide
622
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1004 Router Memory and Storage Options
Summary of Contents for ASR 1001
Page 2: ... 2013 2017 Cisco Systems Inc All rights reserved ...
Page 20: ...Cisco ASR 1000 Series Router Hardware Installation Guide xx Contents ...
Page 30: ...Cisco ASR 1000 Series Router Hardware Installation Guide xxx Preface Warning Definition ...
Page 32: ...Cisco ASR 1000 Series Router Hardware Installation Guide xxxii Preface Warning Definition ...
