Configuring the Card Type for the 2-Port Channelized T3/E3 ATM CEoP SPA
SUMMARY STEPS
1.
Router # enable
2.
Router# configure terminal
3.
Router(config)#
card type {t3
|
e3
}
slot subslot
4.
Router(config)#
controller
{
t3
|
e3
}
slot/subslot/port
5.
Router(config-controller)#
channelized mode {t1 | e1}
6.
Router(config-controller)#
cem-group group unframed
7.
Do one of the following:
•
Router(config-controller)#
{t1
}
1-28 cem-group group timeslots 1-24
•
Router(config-controller)#
{e1
}
1-21 cem-group group timeslots 1-31
8.
Router(config-controller)#
atm
9.
Router (config-if)# exit
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode.
Router # enable
Step 1
Enters global configuration mode.
Router# configure terminal
Step 2
Selects a card type.
Router(config)#
card type {t3
|
e3
}
slot subslot
Step 3
or
Use the
no
form of the command to remove the card type.
Selects the controller to configure the SPA port.
Router(config)#
controller
{
t3
|
e3
}
slot/subslot/port
Step 4
Effective from Cisco IOS XE Release 3.6.0S, T3 and E3
card types are supported.
Note
Swaps between the CT3-T1 and CT3-E1 modes. This is applicable
only if the card type is T3.
Router(config-controller)#
channelized mode
{t1 | e1}
Step 5
Creates a SAToP CEM group and configures the port for
clear-channel CEM mode.
Router(config-controller)#
cem-group group
unframed
Step 6
or
To delete the CEM circuit and release the time slots, use the
no
cem-group group-number
command.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17
479
Configuring the Circuit Emulation over Packet Shared Port Adapter
Configuring Port Usage: An Overview