S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
1-66
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
reload
reload
To reload the switch and all attached Fabric Extender chassis or a specific Fabric Extender, use the
reload
command.
reload
{
all
|
fex
chassis_ID
}
Syntax Description
Command Default
Reloads the Cisco Nexus 5000 Series switch.
Command Modes
EXEC mode
Command History
Usage Guidelines
The
reload
command disrupts traffic on the switch and Fabric Extender.
Note
The
reload
command does not save the running configuration. Use the
copy running-config
startup-config
command to save the current configuration on the device.
Examples
This example shows how to reload the Cisco Nexus 5000 Series switch:
switch#
copy running-config startup-config
switch#
reload
This command will reboot the system. (y/n)?
[n]
y
This example shows how to reload a Fabric Extender:
switch#
reload fex 101
WARNING: This command will reboot FEX 101
Do you want to continue? (y/n) [n]
y
Related Commands
all
Reboot the entire Cisco Nexus 5000 Series switch and all attached Fabric
Extender chassis.
fex
chassis_ID
Reboot a specific Fabric Extender chassis. Chassis ID is 100 to 199.
Release
Modification
4.0(0)N1(1a)
This command was introduced.
4.0(1a)N2(1)
Support for the Cisco Nexus 2000 Series Fabric Extender was added.
Command
Description
copy running-config
startup-config
Copies the current running configuration to the startup configuration.
show version
Displays information about the software version.