S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
2-62
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
spanning-tree mst hello-time
spanning-tree mst hello-time
To set the hello-time delay timer for all the instances on the switch, use the
spanning-tree mst hello-time
command. To return to the default settings, use the
no
form of this command.
spanning-tree mst hello-time
seconds
no spanning-tree mst hello-time
Syntax Description
Command Default
2 seconds.
Command Modes
Configuration mode
Command History
Usage Guidelines
If you do not specify the
hello-time
value, the value is calculated from the network diameter.
Examples
This example shows how to set the hello-time delay timer:
switch(config)#
spanning-tree mst hello-time 3
Related Commands
seconds
Number of seconds to set the hello-time delay timer for all the instances on
the switch; the range of valid values is from 1 to 10 seconds.
Release
Modification
4.0(0)N1(1a)
This command was introduced.
Command
Description
show spanning-tree
mst
Displays the information about the MST protocol.
