Cisco Aironet 2700 Series Page 5 Deployment Manual Download | Manualshive

Page: 5 / 88

background image

5

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Figure 6

Identifying APs Physically

Feature Module Support

AP 3700 and AP 3600 both have integrated support for option modules. The goal in supporting a modular
design is to offer a product that can provide longevity and true flexibility as technology changes. This
provides a real value protection for customers. It also provides Cisco with an opportunity to introduce
new features and functionality into a current stable platform.

The Wireless Security and Spread Spectrum Intelligence (WSSI) module adds new functionality to the
AP to future-proof customers' investment. This module provides a dedicated monitor radio to scan the
full spectrum (not just the channel on which the AP is operating). It will offload complete monitoring
and security services to the monitor module including CleanAir, WIDS/WIPS, Context-aware Location,
Rogue Detection, and Radio Resource Management (RRM). This module allows for full spectrum
analysis on all channels on both the 2.4 and 5 GHz bands.

Having a WSSI module avoids having the need to deploy a separate, dedicated overlay network for full
spectrum monitoring and eliminates the need for an extra cable pull and additional infrastructure costs
(

Figure 7

).

There is also an option module for the AP 3600 that provides 802.11ac (Wave-1) functionality. This
option cannot be used on the AP 3700 because it already has 802.11ac (Wave-1) integrated. This option
module for the AP 3600 will operate at 5GHz and allow the AP 3600 to fully support 802.11a/n along
with 802.11ac clients. Wave-1 functionality supports a 1.3 Gbps PHY / ~1 Gbps MAC (throughput)
using 3 spatial streams, 80 MHz, and 256 QAM. The option module does not support ClientLink 2.0 but
rather supports the Explicit beamforming specification that is part of the 802.11ac standard.

Look out for additional modules for 3/4G support and 802.11ac Wave-2.

Use of option modules may require local power supply, Cisco power injector, .3at PoE+, or the use of
Cisco Enhanced PoE, as the module typically increases the power draw to greater than 15.4W (.3af).

Note

Cisco Enhanced PoE was created by Cisco and is the forerunner to 802.3at PoE+.

«
...
3
4
5
6
7
...
»

Summary of Contents for Aironet 2700 Series

























































































Reviews:

No comments

Related manuals for Aironet 2700 Series

Brand: Linkskey Pages: 8

Brand: Ubiquiti Pages: 16

Brand: Caimore Pages: 83

Brand: Pakedge Pages: 62

Brand: HANSONG Pages: 34

Brand: ZyXEL Communications Pages: 164

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 26

Brand: Samsung Pages: 28

Brand: Samsung Pages: 29

SWL-4000AP Series

Brand: Samsung Pages: 89

Brand: Fry's Electronics Pages: 104

Conduit AP MTCAP-868-002A

Brand: Multitech Pages: 30

Brand: PI Manufacturing Pages: 23

Brand: EMS Pages: 6

Brand: BroadMobi Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands