2-35
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Figure 2-25
1552C Access Point Facing Up in Vault Location
Step 5
Position the two bolts on the access point into the quick mount notches on each side of the mounting
bracket (see
Figure 2-23
). Ensure that the hinged door is facing out.
Step 6
Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
point.
Step 7
Ensure that the front of the access point is vertical, and tighten the four bolts to
13 to 15 ft lbs
(17.6 to 20.3 Nm).
Step 8
For the 1552CU access point, continue with
Installing Antennas, page 2-36
. For the 1552C access point,
continue with
Powering the Access Point, page 2-45
.
1
M8 x16 bolt (supplied with pole mount kit)
3
F-connector
2
M8 x16 bolt (supplied with pole mount kit)
33
15
8
2
3
2
1
