2-31
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-12632-02
Chapter 2 Mounting Instructions
Mounting the Access Point
Figure 2-16
Clamp Bracket with Cable Clamps
Step 2
Attach the strand bracket to the access point using two M8 x16 bolts (with flat and lock washers) on each
side of the access point (see
). Only hand-tighten the bolts.
Note
When attached to the cable strand, the access point must be vertically adjusted before the final
tightening of the bolts.
1
Cable strand bracket
2
Two cable clamps, flat washer, and M8 flange nut.
