3-4
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
OL-4072-04
Chapter 3 Mounting and Alignment Overview
Bridge LEDs
Figure 3-1
LED and Connector Locations
When the bridge is initially powered-up, installation mode is activated and the bridge attempts to
associate to a root bridge for 60 seconds. If it is unable to associate with a root bridge, it automatically
assumes the root bridge role. The Install LED provides bridge association status during installation mode
as shown in
Table 3-2
.
1
Ethernet LED
3
Radio LED
2
Status LED
4
Install LED
88818
4
1
3
2
Table 3-2
Install LED Association Status
Install LED
State
Bridge State
Off
Self test
Startup.
Amber blinking
Non-root, searching
Not associated (non-root mode). The
bridge attempts to associate with a root
bridge for 60 seconds
1
.
1.
Preconfigured bridges search indefinitely.
Amber
Non-root, associated
Associated (non-root mode).
Green blinking
Root, searching
Not associated (root mode). The bridge
attempts to associate with a non-root
bridge indefinitely.
Green
Root, associated
Associated (root mode).