18
78-15954-02
Using a Telnet Session to Access the CLI
Follow these steps to access the CLI using a Telnet session. These steps are
for a PC running Microsoft Windows with a Telnet terminal application.
Check your PC operating instructions for detailed instructions.
1.
Choose
Start > Programs > Accessories > Telnet
.
If Telnet is not listed in your Accessories menu, choose
Start > Run
,
type
Telnet
in the entry field, and press
Enter
.
2.
When the Telnet window appears, click
Connect
and choose
Remote
System
.
3.
In the Host Name field, type the access point’s IP address and click
Connect
.
Assigning Basic Settings
After you determine or assign the bridge’s IP address, you can browse to the
bridge’s Express Setup page and perform an initial configuration. Follow
these steps.
1.
Open your Internet browser. The bridge web-browser interface is fully
compatible with these browsers: Microsoft Internet Explorer 6.0 and
later and Netscape Navigator 7.0 and later.
Summary of Contents for Aironet 1300 Series
Page 26: ...26 78 15954 02 ...
