Cisco Aironet 1300 Series Quick Start Manual Download Page 10 | Manualshive

Page: 10 / 34

background image

10

78-15954-02

Related Documents

The following document provides detailed information about installing your
access point/bridge:

•

Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware
Installation Guide

This guide provides instructions for configuring your access point/bridge
using its graphical user interface (GUI). You may also configure the access
point/bridge through its console port to access the command line interface
(CLI) and issue IOS commands. If you choose to use the CLI, please refer to
the following documents for additional information and instructions:

•

Cisco Aironet 1300 Series Outdoor Access Point/Bridge Software
Configuration Guide

•

Cisco IOS Command Reference for Cisco Aironet Access Points and
Bridges

In addition to the integrated antenna, the access point/bridge can be used with
existing certified Cisco Aironet 2.4-GHz antennas. If you are using an
optional external antenna, please refer to the applicable documentation for
the specific antenna. Antenna documentation is shipped with the antenna.

With the exception of this guide, the documents identified in this section are
available on Cisco.com. Follow this link to access them:

http://www.cisco.com/en/US/products/ps5861/tsd_products_support_series_
home.html

«
...
8
9
10
11
12
...
»

Summary of Contents for Aironet 1300 Series



































Reviews:

No comments

Related manuals for Aironet 1300 Series

Brand: TCL Pages: 23

Brand: LevelOne Pages: 42

WI DRIVE WID11GEN

Brand: Dension Pages: 26

Brand: AirLive Pages: 46

Brand: Reliance Pages: 33

Brand: RadioLabs Pages: 9

NUCLIAS CONNECT DAP-2680

Brand: D-Link Pages: 48

Brand: D-Link Pages: 24

Brand: D-Link Pages: 24

Brand: D-Link Pages: 24

Brand: D-Link Pages: 25

Brand: D-Link Pages: 26

nuclias connect DAP-2662

Brand: D-Link Pages: 12

Nuclias Connect DAP-2622

Brand: D-Link Pages: 86

Brand: D-Link Pages: 18

Nuclias Connect DAP-2622

Brand: D-Link Pages: 8

Nuclias DBA-2520P

Brand: D-Link Pages: 8

Brand: D-Link Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands