5-13
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-03
Chapter 5 Configuring the Client Adapter
Overview of Security Features
Synchronizing Security Features
In order to use any of the security features discussed in this section, both your client adapter and the access
point to which it will associate must be set appropriately.
indicates the client and access point
settings required for each security feature. This chapter provides specific instructions for enabling the security
features on your client adapter. Refer to the software configuration guide for your access point for
instructions on enabling any of these features on the access point.
Table 5-2
Client and Access Point Security Settings
Security Feature
Client Setting
Access Point Setting
Static WEP with open
authentication
Create a WEP key and enable Static
WEP Keys and Open
Authentication
Set up and enable WEP and enable
Open Authentication
Static WEP with shared key
authentication
Create a WEP key and enable Static
WEP Keys and Shared Key
Authentication
Set up and enable WEP and enable
Shared Key Authentication
LEAP authentication
Enable LEAP
Set up and enable WEP and enable
Network-EAP
EAP-TLS authentication
Enable Host Based EAP and
Dynamic WEP Keys in ACU and
select TLS as the EAP Type in the
Authentication Manager
Set up and enable WEP and enable
Network-EAP
PEAP authentication
Enable Host Based EAP and
Dynamic WEP Keys in ACU and
select Cisco PEAP (or PEAP) as
the EAP Type in the Authentication
Manager
Set up and enable WEP and enable
Network-EAP
MIC
Use driver version 2.30 or greater
Set up and enable WEP with full
encryption, set MIC to MMH, and
set Use Aironet Extensions to Yes
TKIP
Use firmware version 5.02.19 or
greater
Set up and enable WEP, set TKIP to
Cisco, and set Use Aironet
Extensions to Yes
Broadcast key rotation
Use firmware version 5.02.19 or
greater and enable LEAP,
EAP-TLS, or PEAP
Set up and enable WEP and set
Broadcast WEP Key Rotation
Interval to any value other than
zero (0)
