29
Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions
78-17634-01
Mounting the Access Point
Figure 11
Ground Lug Attachment Point
Step 4
Attach the supplied ground lug to the two threaded mounting studs on the access point using the two
supplied locking Hex nuts. Torque the nuts to 10 to 12 in-lb.
Note
Do not remove the two factory installed lock nuts on the mounting studs.
Note
After you install the access point on its support, connect this ground to the building ground using
6 AWG wire.
Attaching the Mounting Bracket
The mounting bracket is suitable for rooftop, mast, or tower supports. How you attach the mounting
bracket to the support depends on the mast diameter, as follows:
1
Threaded mounting studs for the ground lug
117141
1
1
Mast Type
Mast Diameter
Mast Attachment
Rooftop support
or small mast
1.25 to 2.75 in.
(30.5 to 69.9 mm)
Attach the mast to the mounting bracket between the
bracket and access point (see
Figure 12
)
