Cisco 8831, Administration Manual

Page: 96 / 168

Configuration Reference Description Feature
For more information, see Cisco Unified
Communications Manager Features and
Services Guide
, “ Monitoring and
Recording
”
chapter.
Allows a supervisor to silently monitor an active
call. The supervisor cannot be heard by either party
on the call. The user might hear a monitoring
audible alert tone during a call when it is being
monitored.
When a call is secured, the security status of the
call is displayed as a lock icon on Cisco Unified IP
Phones. The connected parties might also hear an
audible alert tone that indicates the call is secured
and is being monitored.
When an active call is being monitored or
recorded, the use can receive or place
intercom calls; however, if the user place
an intercom call, the active call will be put
on hold, which causes the recording
session to terminate and the monitoring
session to suspend. To resume the
monitoring session, the party whose call
is being monitored must resume the call. Note
Monitoring and Recording
Requires no configuration. Mutes the conference phone from the Sound Base,
DCU or connected external microphones. Mute
No configuration required. Makes it easier for end users to identify transferred
calls by displaying the original caller
’
s phone
number. The call appears as an Alert Call followed
by the caller
’ s telephone number.
No Alert Name
For more information, see Cisco Unified
IP Conference Phone 8831 User Guide .
Allows a user to dial a number without going off
hook. Onhook Dialing
For more information, see Cisco Unified
Communications Manager Features and
Services Guide
,
“
Call Pickup
”
chapter.
Allows a user to answer a call ringing on a phone
in another group that is associated with the user's
group. Other Group Pickup
No configuration required. This feature enhances the phone interface for the
Extension Mobility user by providing friendly
messages. Phone Display Message for
Extension Mobility Users
No configuration required. Allows the user to dial E.164 numbers prefixed with
a plus (+) sign.
To dial the + sign, the user needs to press and hold
the star (*) key for at least 1 second. This applies
to dialing the first digit for an on-hook (including
edit mode) or off-hook call.
Plus Dialing
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
86
Features, templates, services, and user setup
Available telephony features