Cisco 8811 User Manual Download

Page: 11 / 146

C H A P T E R

Getting Started

•

Accessibility Features, page 1

•

Cisco IP Phone 8811, page 1

•

Cisco IP Phone 8841, page 6

•

Cisco IP Phones 8851 and 8851NR, page 11

•

Cisco IP Phone 8861, page 16

•

Power Save and Power Save Plus, page 21

•

Additional Information, page 22

Accessibility Features

Cisco IP Phones provide accessibility features for the vision impaired, the blind, and the hearing and mobility
impaired.

For detailed information about the accessibility features on these phones, see

http://www.cisco.com/c/en/us/

support/collaboration-endpoints/unified-ip-phone-8800-series/products-technical-reference-list.html

You can also find more information about accessibility at this Cisco website:

http://www.cisco.com/web/about/responsibility/accessibility/index.html

Cisco IP Phone 8811

The following sections describe attributes of the Cisco IP Phone 8811.

Phone Connections

Connect your phone to the corporate IP telephony network, using the following diagram.

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager 10.5

Summary of Contents for 8811



















































































































































Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands

Cisco 8811, User Manual

Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands