3-16
Cisco 880 Series Integrated Services Router Software Configuration Guide
OL-22206-01
Chapter 3 Basic Router Configuration
Configuring the Fast Ethernet LAN Interfaces
Firmware Source Filename (version)
-------- ------ ------------------
VDSL embedded VDSL_LINUX_DEV_01212008 (1)
Modem FW Version: 100426_1053-4.02L.03.A2pv6C030f.d22j
Modem PHY Version: A2pv6C030f.d22j
DS Channel1 DS Channel0 US Channel1 US channel0
Speed (kbps): 0 24184 0 1047
Previous Speed: 0 24176 0 1047
Total Cells: 0 317070460 0 13723742
User Cells: 0 0 0 0
Reed-solomon EC: 0 0 0 0
CRC Errors: 0 0 0 0
Header Errors: 0 0 0 0
Interleave (ms): 0.00 0.08 0.00 13.56
Actual INP: 0.00 0.00 0.00 1.80
Training Log: Stopped
Training Log Filename: flash:vdsllog.bin
Verifying CPE to Peer Connection for ADSL
Ping the peer to confirm that CPE to peer configuration is setup correctly.
Router#
ping 30.0.0.2 rep 20
Type escape sequence to abort.
Sending 20, 100-byte ICMP Echos to 30.0.0.2, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (20/20), round-trip min/avg/max = 20/22/28 ms
Router#
Configuring the Fast Ethernet LAN Interfaces
The Fast Ethernet LAN interfaces on your router are automatically configured as part of the default
VLAN and are not configured with individual addresses. Access is provided through the VLAN. You
may assign the interfaces to other VLANs.
Configuring the Wireless LAN Interface
The Cisco 880 series wireless routers have an integrated 802.11n module for wireless LAN connectivity.
The router can then act as an access point in the local infrastructure. For more information about
configuring a wireless connection, see
Chapter 4, “Basic Wireless Device Configuration”
.
