Cisco 860 Series Hardware Installation Manual Download Page 74

Page: 74 / 292

1-54

Cisco Integrated Services Router Hardware Installation Guide

Chapter 1 Product Overview

Cisco 860, 880, 890 Series

Cisco 880 Series with Embedded WLAN Antennas

Some Cisco 880W, 880WD, and 880-WD ISRs have three embedded WLAN antennas.

These ISRs are fixed-platform routers that:

•

Provide integrated VPN, embedded Wi-Fi CERTIFIED™, 802.11b/g/n-compliant wireless AP, and
backup capabilities.

•

Use single-band (2.4 GHz) WLAN cards or dual-band (2.4 GHz and 5 GHz) WLAN cards.

•

Require a single external power supply: a 30-W power supply for non-POE-enabled routers or a
60-W power supply for POE-enabled routers.

•

Have a fixed 512 MB of system memory.

For information on configuring the Cisco 880 series ISRs, see

Cisco 880 Series Integrated Services

Router Software Configuration Guide

Cisco 887VA-WD

Figure 1-28

shows the front panel details of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs. The

front panel has LEDs only. All the ports are in the back panel.

Figure 1-28

Front Panel of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs

Fast Ethernet WAN port

PoE power connector (optional)

Voice BRI ports

Reset button

Voice ports—four FXS/DID ports and one
FXO port.

Power connector

Fast Ethernet LAN—four ports

Earth ground connection

Console Port

Kensington security slot

28498

PPP

WLAN

POE

LINK 2.4GHz 5GHz

Cisco 800

eries

FE LAN

VPN

CD DATA

Summary of Contents for 860 Series





































































































































































































































































































Search results

Summary of Contents for 860 Series

Reviews:

Brands by name

Popular brands

Cisco 860 Series, Hardware Installation Manual

Search results

Summary of Contents for 860 Series

Reviews:

Brands by name

Popular brands