manualshive.com logo in svg

Cisco 860 Series, Hardware Installation Manual

Share
Download
Cisco 860 Series Hardware Installation Manual Download Page 158

 

2-6

Cisco Integrated Services Router Hardware Installation Guide

 

Chapter 2      Installing the Router

  Installing the Cisco 810 ISR

Figure 2-5

T-Rail

Installing the SIM Card

This section describes how to install and replace the SIM card. Ensure that the router is not mounted to 
a wall, rack, or DIN rail.

Caution

Do not touch any part of the exposed PCB circuit area when the SIM cover is removed.

Warning

Hot surface. 

Statement 1079

To install the SIM card, perform these steps:

Step 1

Power off the router and disconnect the power cable from the power source.

Step 2

Place the router on a sturdy solid surface and orient the SIM access panel up to gain access. Ensure that 
any installed antennas are oriented appropriately to avoid damage.

Step 3

Remove the SIM access panel being held in place by four 6-32 screws. (See 

Figure 2-6

).

2

8

5669

To POE Power

Source

Summary of Contents for 860 Series





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands