24
All Code Scan Method
1. Turn on the TV.
2. Press the
Mode
key on the remote control until the red LED on the Power key
fl
ashes twice.
3. Within 5 seconds, press
001
. The red LED will
fl
ash twice to con
fi
rm the entered code.
4. Point the remote control toward the TV and press and hold the
Power
key until your TV turns off.
5. While the remote control is scanning the codes, you can release the
Power
key and test the function keys.
• If a key is not pressed within 10 seconds, the brand search is stopped and the remote control returns to
normal
mode.
• If the TV goes into Stand-By mode during the scan process, immediately release the
Power
key and
press
OK
. The red LED will
fl
ash twice to indicate that the code is stored.
Tips:
• This process may take as long as 10 minutes.
• The remote control may
fi
nd several codes that operate your TV. However, if some function keys do not
work properly, repeat steps 1 through 5 until a code is found that operates all function keys.
• During the scan process you can press the
key as many as
fi
ve times to select previous codes or
the
key to search forward again.
Remember the Code That Worked
To
fi
nd out which code your remote control uses to operate your TV:
1. Press the
Mode
key on the remote control until the red LED
fl
ashes twice.
2. Press
002
. The red LED will
fl
ash twice to con
fi
rm the entered code.
3. Press
1
; then, count the number of times the LED
fl
ashes. The number of
fl
ashes indicates the
fi
rst number
of the code.
4. Press
2
; then, count the number of
fl
ashes. The number of
fl
ashes indicates the second number of the code.
5. Press
3
; then, count the number of
fl
ashes. The number of
fl
ashes indicates the third number of the code.
Tips:
• Write the code here: ___________________________________________________________________ .
• If the LED does not
fl
ash after you press the keys, the code digit is 0.
Summary of Contents for 8485DVB
Page 2: ......
Page 27: ...25 Appendix ...