6
Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide
78-12839-01
Connecting Cables to the Router
Connecting a Terminal or PC
You can connect either a terminal or a PC to the router. Use the terminal or PC to configure the software,
using the command-line interface (CLI), or to troubleshoot problems that arise. To connect a terminal or
PC, follow the steps in
Figure 5
.
Figure 5
Connecting a Terminal or PC
Connecting the Power Supply
To connect the power supply, follow the steps in
Figure 6
.
Warning
The device is designed to work with TN power systems.
Warning
This product relies on the building’s installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S.
(240 VAC, 16A international) is used on the phase conductors (all current-carrying
conductors).
Warning
This equipment is intended to be grounded. Ensure that the host is connected to earth
ground during normal use.
56638
1. Connect light blue cable
to CONSOLE port.
Cisco 828 router
2. If necessary, connect other end of
cable to DB-9-to-RJ-45 adapter.
3. Connect DB-X
connector to
terminal or PC.
DB-X-to-RJ-45
adapter
+5 VDC
ETHERNET 10 BASE T
CONSOLE
G.SHDSL
4
3
2
1
TO HUB
TO PC
Model Cisco 828
