Cloud Voice Service
Version 1.0 ©Wharf T&T Limited 2013
7
3.4
Ending a Call
To end a call, hang up the handset or press the
EndCall
soft key.
3.5
Muting a Call
1. Press
the
Mute
soft key.
2. To disengage mute, press
UnMute
soft key again.
Note: If you are using mute along with the speakerphone, lifting up the handset will disengage
mute function.
3.6
Putting a Call on Hold
When you put a call on hold, the call remains active even though you and the other
party cannot hear each other. You can answer or place another call while a call is
being on hold.
1.
To place a call on hold, press the
Hold
button.
2.
The hold button will light up when a call is on hold.
3.
To resume a call on hold, press the
Hold
button again.
3.7
Transferring a Call to another Party
* If you wish to transfer the call to external partner, please remember to add ”9” before the 8-
digits telephone number
3.8
Redialing the Last Number Dialed
To redial the most recently dialed number, press the
Redial
soft key. Doing this
without lifting up the handset will activate the speaker.
3.9
Forwarding Calls to another Phone
3.9.1 Setting up Call Forwarding from your IP Phone
1.
During a call, press the
Transfer
soft key. The call will be put on hold.
2.
Dial the number or office extension to which you want to transfer the call.
3.
When the call rings on the other end, press
Transfer
again. Or when the party
answers, announce the call and then press
Transfer
.
If the party refuses the call, press the
Hold
button to return to the original call.
1. Press
the
CFwdAll
soft key. You will hear two beeps.
2. Enter the destination number to which you want to forward all your calls, as if you
were placing a call to that number.
3. After you enter the number, you will hear two beeps. The LCD screen will display
a message confirming the number or extension to which your calls are being
forwarded.
4.
To cancel all call forwarding, press the
CFwdAll
soft key.
