1-30
Cisco 7600 Series Router Installation Guide
OL-4503-26
Chapter 1 Product Overview
Cisco 7600 Series Router Components
Figure 1-32
4000 W DC-Input Power Supply
Both and DC-input Both the AC-input power and DC-input power supplies support redundancy. When
power is removed from one supply, the redundant power feature causes the second supply to produce full
power.
For power supply LED descriptions, see the
“Environmental Monitoring of the Power Supply” section
on page 1-32
. For complete power specifications, see
Appendix A, “Technical Specifications.”
Cisco 7609-S Router Power Supplies
Note
For information on installing or replacing a power supply, see the
“Removing and Replacing the Power
Supply” section on page 5-2
.
The Cisco 7609-S router use the following power supplies:
•
4000 W AC input (WS-CAC-4000W-US1) )
•
4000 W DC input (PWR-4000-DC)
•
6000 W AC input (WS-CAC-6000W)
•
6000 W DC input (PWR-6000-DC)
The AC-input power supplies (see
Figure 1-28
,
Figure 1-29
, and
Figure 1-30
) have power cords that
allows you to connect each power supply to the site power source. You can connect the DC-input power
supplies (see
Figure 1-32
and
Figure 1-33
) to the power source with heavy gauge wiring connected to a
terminal block. The wire gauge size is determined by local electrical codes and restrictions.
INPUT OK
FAN
OK
OUTPUT
FAIL
I
0
97297
1
3
2
+
VE-1
-VE-1
+
VE-2
-VE-2
+
VE-3
-VE-3
