4-5
Cisco Video Surveillance 6050 IP Camera Installation Guide
OL-31413-01
Chapter 4 Camera Management
Adjusting the IP Camera Viewing Angle and Focus and Completing the Installation
b.
Manually rotate the lens to fine-tune the focus until the live image is clear.
c.
Tighten the lens lock screw.
Step 4
Take these actions to complete the installation:
a.
Remove the provided silica gel from its protective bag and use the provided double-sided tape to
attach it to the inner side of the dome cover, as shown in the following figure.
The silica gel helps remove moisture from inside the camera.
Note
Replace the silica gel whenever you open the dome cover.
