10-1
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
C H A P T E R
10
Scenario: Configuring Connections for
a Cisco AnyConnect VPN Client
This chapter describes how to configure the adaptive security appliance so that
remote users can establish SSL connections using a Cisco AnyConnect VPN
client.
This chapter includes the following sections:
•
About SSL VPN Client Connections, page 10-1
•
Obtaining the Cisco AnyConnect VPN Client Software, page 10-2
•
Example Topology Using AnyConnect SSL VPN Clients, page 10-3
•
Implementing the Cisco SSL VPN Scenario, page 10-3
•
What to Do Next, page 10-12
About SSL VPN Client Connections
To begin the process of using the SSL VPN Client (AnyConnect), remote users
enter in their browser the IP address or FQDN of the SSL VPN interface of the
adaptive security appliance. The browser connects to the SSL VPN-enabled
interface and displays the login screen.
Note
Administrative rights are required the first time the Cisco AnyConnect VPN client
is installed or downloaded.