manualshive.com logo in svg

Cisco 5011, User Manual, Page: 9 / 74

Share
Download
Cisco 5011 User Manual Download Page 9

C H A P T E R

 

1-1

Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide

OL-22669-01

1

Introduction

The 5010/5011 cameras are fixed network dome cameras with a built-in Web-based viewer for live 
streaming to a standard Web browser (Microsoft

®

 

Internet Explorer

®

 8). 

The cameras support standard H.264 and MJPEG compression formats and dual video streams that can 
be configured for a variety of resolutions, frame rates, and bit rates. 

Each camera also includes a 2.8 - 8mm Varifocal Megapixel lens, a ready-to-install indoor enclosure, 
and a mechanical IR cut filter for increased low-light sensitivity. Additional lenses are available, and the 
cameras accept a wide range of megapixel varifocal CS-mount lenses.

The cameras also include built-in Power over Ethernet (PoE), which supplies power to the camera 
through the network. If PoE is not available, the camera is prewired for 24 VAC.

Model

CIVS-IPC-5010

Indoor fixed dome network camera, 2.1 megapixel, day/night, and a 

 

2.8 ~ 8 mm varifocal megapixel lens. This camera has a 

clear

 dome.

CIVS-IPC-5011

Indoor fixed dome network camera, 2.1 megapixel, day/night, and a 

 

2.8 ~ 8 mm varifocal megapixel lens. This camera has a 

smoked

 dome.

s

Getting Started

Before installing your network camera, thoroughly familiarize yourself with the information in this 
section of the manual.

Note

•

Do not use a network hub when configuring the network settings for the camera.

  •

To ensure secure access to the network camera, place the camera behind a firewall when it is 
connected to a network.

Summary of Contents for 5011











































































Reviews:

No comments