17
Note
The administrative username and password you created in the Startup Wizard are
case sensitive.
Step 2
The CLI displays the root level system prompt:
#(system prompt)>
The system prompt can be any alphanumeric string up to 31 characters. You can change it by
entering the
config prompt
command.
Note
The CLI automatically logs you out without saving any changes after 5 minutes of
inactivity. You can set the automatic logout from 0 (never log out) to 160 minutes
using the
config serial timeout
command
.
Note
Cisco Aironet lightweight access points do not connect to the 4400 series controller if the
date and time are not set properly. Set the current date and time on the controller before
allowing the access points to connect to it.
Verifying Interface Settings and Port Operation
Follow these steps to verify that your interface configurations have been set properly and the
controller’s ports are operational.
Step 1
Enter
show interface summary
. The controller’s current interface configurations appear:
Interface Name Port Vlan Id IP Address Type Ap Mgr
-------------------------------- ---- -------- -------------- ------- -----
ap-manager LAG 10 10.91.104.99 Static Yes
management LAG 10 10.91.104.93 Static No
service-port N/A N/A 10.10.0.9 Static No
virtual N/A N/A 1.1.1.1 Static No
