13-7
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
Chapter 13 Configuring GVRP
Configuring GVRP on the Switch
Caution
Set the same GARP timer values on all Layer 2-connected devices. If the GARP timers are set differently
on Layer 2-connected devices, GARP applications (for example, GMRP and GVRP) do not operate
successfully.
To adjust the GARP timer values, perform this task in privileged mode:
This example shows how to set GARP timers and verify the configuration:
Console> (enable) set garp timer leaveall 10000
GMRP/GARP leaveAll timer value is set to 10000 milliseconds.
Console> (enable) set garp timer leave 600
GMRP/GARP leave timer value is set to 600 milliseconds.
Console> (enable) set garp timer join 200
GMRP/GARP join timer value is set to 200 milliseconds.
Console> (enable) show garp timer
Timer Timer Value (milliseconds)
-------- --------------------------
Join 200
Leave 600
LeaveAll 10000
Console> (enable)
Displaying GVRP Statistics
To display GVRP statistics on the switch, perform this task:
This example shows how to display GVRP statistics for port 1/1:
Console> (enable) show gvrp statistics 1/1
Join Empty Received: 0
Join In Received: 0
Empty Received: 0
LeaveIn Received: 0
Leave Empty Received: 0
Leave All Received: 40
Join Empty Transmitted: 156
Join In Transmitted: 0
Empty Transmitted: 0
Leave In Transmitted: 0
Leave Empty Transmitted: 0
Leave All Transmitted: 41
VTP Message Received: 0
Console> (enable)
Task
Command
Step 1
Set the GARP timer values.
set garp timer {join | leave | leaveall} timer_value
Step 2
Verify the configuration.
show garp timer
Task
Command
Display GVRP statistics.
show gvrp statistics [mod_num/port_num]