44-2
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 44 Configuring Online Diagnostics
Scheduling Online Diagnostics
Scheduling Online Diagnostics
You can schedule online diagnostics to run at a designated time of day or on a daily, weekly, or monthly
basis for a specific switch. Use the
no
form of this command to remove the scheduling.
Beginning in global configuration mode, use this command to schedule online diagnostics:
This example shows how to schedule diagnostic testing on a specific date and time for a specific switch:
Switch(config)#
diagnostic schedule switch 1 test 1,2,4-6 on january 3 2006 23:32
This example shows how to schedule diagnostic testing to occur weekly at a certain time for a specific
switch:
Switch(config)#
diagnostic schedule switch 1 test 1,2,4-6 weekly friday 09:23
Configuring Health-Monitoring Diagnostics
You can configure health-monitoring diagnostic testing on a specified switch while the switch is
connected to a live network. You can configure the execution interval for each health-monitoring test,
whether or not to generate a system message upon a test failure, or to enable or disable an individual test.
Use the
no
form of this command to disable testing.
Beginning in global configuration mode, use these commands to configure health-monitoring
diagnostics:
Use the
no diagnostic monitor
interval switch
{
num
}
test
{
test-id
|
test-id-range
|
all
} global
configuration command to change the interval to the default value or to zero. Use the
no diagnostic
monitor syslog
command to disable generation of syslog messages when a health-monitoring test fails.
Use the
diagnostic monitor threshold switch
num
test
{
test_id
|
test_id_range
|
all
}
failure count
command to remove the failure threshold.
This example shows how to configure the specified test to run every 2 minutes:
Switch(config)#
diagnostic monitor interval switch 1 test 1 00:02:00 0 1
Command
Purpose
diagnostic schedule switch
num
test
{
test_id
|
test_id_range
|
all
|
basic
|
non-disruptive
} {
daily
hh
:
mm
|
on
mm dd yyyy
hh
:
mm
} |
weekly
day_of_week
hh
:
mm
}
Schedule on-demand diagnostic tests for a specific date and
time, how many times to run the test (iterations), and what
action to take when errors are found.
Command
Purpose
diagnostic monitor interval switch
num
test
{
test_id
|
test_id_range
|
all
}
hour:mm:ss
milliseconds
day
Configure the health-monitoring interval of the specified tests for
the specified switch. By default, monitoring is disabled.
diagnostic monitor syslog
Enable the generation of a syslog message for health-monitoring
test failures. By default, syslog is disabled.
diagnostic monitor threshold switch
num
test
{
test_id
|
test_id_range
|
all
}
failure count
count
Set the failure threshold for monitoring tests. By default,
monitoring is disabled.
