manualshive.com logo in svg

Cisco 2975 - Catalyst LAN Base Switch, Software Configuration Manual

The Cisco 2975 Catalyst LAN Base Switch offers streamlined network management with robust features. Enhance your networking capabilities with ease by downloading the user manual from our website, completely free. Explore in-depth specifications and configurations to maximize the potential of this cutting-edge Cisco switch.

Share
Download
background image

 

13-5

Catalyst 2975 Switch Software Configuration Guide

OL-19720-02

Chapter 13      Configuring VLANs

Configuring Normal-Range VLANs

These sections contain normal-range VLAN configuration information:

  •

Token Ring VLANs, page 13-5

  •

Normal-Range VLAN Configuration Guidelines, page 13-5

  •

Configuring Normal-Range VLANs, page 13-6

  •

Default Ethernet VLAN Configuration, page 13-6

  •

Creating or Modifying an Ethernet VLAN, page 13-7

  •

Deleting a VLAN, page 13-8

  •

Assigning Static-Access Ports to a VLAN, page 13-9

Token Ring VLANs

Although the switch does not support Token Ring connections, a remote device such as a Catalyst 5000 
series switch with Token Ring connections could be managed from one of the supported switches. 
Switches running VTP Version 2 advertise information about these Token Ring VLANs:

  •

Token Ring TrBRF VLANs

  •

Token Ring TrCRF VLANs

For more information on configuring Token Ring VLANs, see the 

Catalyst 5000 Series Software 

Configuration Guide

.

Normal-Range VLAN Configuration Guidelines 

Follow these guidelines when creating and modifying normal-range VLANs in your network:

  •

The switch supports 255 VLANs in VTP client, server, and transparent modes. 

  •

Normal-range VLANs are identified with a number between 1 and 1001. VLAN numbers 1002 
through 1005 are reserved for Token Ring and FDDI VLANs.

  •

VLAN configuration for VLANs 1 to 1005 are always saved in the VLAN database. If the VTP 
mode is transparent, VTP and VLAN configuration are also saved in the switch running 
configuration file.

  •

With VTP versions 1 and 2, the switch supports VLAN IDs 1006 through 4094 only in VTP 
transparent mode (VTP disabled). These are extended-range VLANs and configuration options are 
limited. Extended-range VLANs created in VTP transparent mode are not saved in the VLAN 
database and are not propagated. VTP version 3 supports extended range VLAN (VLANs 1006 to 
4094) database propagation. If extended VLANs are configured, you cannot convert from VTP 
version 3 to version 1 or 2. See the 

“Configuring Extended-Range VLANs” section on page 13-10

.

  •

Before you can create a VLAN, the switch must be in VTP server mode or VTP transparent mode. 
If the switch is a VTP server, you must define a VTP domain or VTP will not function.

  •

The switch does not support Token Ring or FDDI media. The switch does not forward FDDI, 
FDDI-Net, TrCRF, or TrBRF traffic, but it does propagate the VLAN configuration through VTP.

  •

The switch supports 128 spanning-tree instances. If a switch has more active VLANs than supported 
spanning-tree instances, spanning tree can be enabled on 128 VLANs and is disabled on the 
remaining VLANs. If you have already used all available spanning-tree instances on a switch, 
adding another VLAN anywhere in the VTP domain creates a VLAN on that switch that is not 
running spanning-tree. If you have the default allowed list on the trunk ports of that switch (which 

Summary of Contents for 2975 - Catalyst LAN Base Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2975 - Catalyst LAN Base Switch

TAMS 1800 Series Installation & Operation Manual preview
1800 Series
Brand: TAMS Pages: 28
Datavideo SE-3000 Instruction Manual preview
SE-3000
Brand: Datavideo Pages: 58
FLIR ACCDPS281B Quick Start Manual preview
ACCDPS281B
Brand: FLIR Pages: 2
KCC KTD-600 Series Manual preview
KTD-600 Series
Brand: KCC Pages: 6
Icy Box IB-AC618 Manual preview
IB-AC618
Brand: Icy Box Pages: 6
S+S Regeltechnik Premasreg 716 Series Operating Instructions, Mounting & Installation preview
Premasreg 716 Series
Brand: S+S Regeltechnik Pages: 32
Cabletron Systems SmartSwitch SBU128 User Manual preview
SmartSwitch SBU128
Brand: Cabletron Systems Pages: 76
Planet WGSW-5240 Specifications preview
WGSW-5240
Brand: Planet Pages: 2
Velleman VAS4 User Manual preview
VAS4
Brand: Velleman Pages: 8
I-Tech NPXW117 User Manual preview
NPXW117
Brand: I-Tech Pages: 19
Linkskey LDV-DM702AUSK Quick Installation Manual preview
LDV-DM702AUSK
Brand: Linkskey Pages: 2
Gefen HDMI-242 User Manual preview
HDMI-242
Brand: Gefen Pages: 12
TeleAdapt ConferenceHub TA-6500 User Manual preview
ConferenceHub TA-6500
Brand: TeleAdapt Pages: 16
Elk Products ELK-M1DBHR Installation Manual preview
ELK-M1DBHR
Brand: Elk Products Pages: 2
Kramer VP-772T Quick Start Manual preview
VP-772T
Brand: Kramer Pages: 4
G&D DVIMUX4-DL-PS/2 Installation And Operation Manual preview
DVIMUX4-DL-PS/2
Brand: G&D Pages: 40
GarrettCom Magnum Quad-Series Installation And User Manual preview
Magnum Quad-Series
Brand: GarrettCom Pages: 55
UNICOM MicroGST/5 GEP-32005T User Manual preview
MicroGST/5 GEP-32005T
Brand: UNICOM Pages: 12

Brands by name

Popular brands

Load more brands