Cisco 2010, Hardware Installation Manual

Page: 82 / 92

R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
5-4
Cisco Connected Grid Routers 2010 Hardware Installation Guide
OL-21559-01
Chapter 5 Installing and Upgrading Internal Modules
Removing and Installing Compact Flash Memory Cards
Removing a Compact Flash Memory Card
To remove a compact flash memory card from the chassis, perform the following steps. See Figure 5-2 ,
Figure 5-3 , and Figure 5-4 .
Caution
Do not remove a compact flash memory card from the chassis while it is being accessed. The CF LED
blinks to indicate when flash memory is being accessed. Removing the compact flash memory card from
the router while flash memory is being accessed can cause data corruption and erratic operation.
Step 1
Remove the compact flash cover by placing a flat-blade screwdriver in the slot and pushing sideways
against the tension to release the cover door. (See
Figure 5-2 and Figure 5-3 .)
Figure 5-2 Inserting Screwdriver Into the Compact Flash Cover
PSU2
PSU OK
PWR-150W
-HV
CF1
CF0
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
Cisco Connected
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
277598
PS
Type
Lo V DC
Hi V DC
or
V AC