Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
Modules Internal to the Cisco 1941 Router
23
Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
Figure 21
CompactFlash Memory Card Slot in Cisco 1900 Series Routers
Installing a CompactFlash Memory Card
To install a CompactFlash memory card, perform the following steps:
Step 1
Make sure that the ejector button is fully seated so that it does not project out from the panel. (See
Figure 21
).
Note
If the ejector button is projecting out from the panel, push it in until it is flush with the bezel.
Step 2
Insert the CompactFlash memory card into the slot until it is fully seated. The ejector button remains
flush with the panel.
Note
If the ejector button is projecting from the panel after you insert the CompactFlash memory card,
remove the CompactFlash memory card, press the ejector button until it clicks, and reinsert the
CompactFlash memory card.
1
Ejector button
2
CompactFlash slot
3
CF LED
4
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
CF 1
CF 0
253020
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
1
2
3
