Cisco 1700 series, Manual

Page: 38 / 108

72 73
Cisco 7301 Series Cisco 7301 Series
Series Specifications
continued
Key Applications for Enterprise deployments
•
Large-branch-office router:
High-performance
with features enabled branch-office router
with support for up to OC-3/STM-1 or Gigabit
Ethernet connectivity . It is ideal for Branch-office
Internet gateway, Voice (IP-to-IP) Gateway and
Site-to-Site Gateway
• Enterprise High Speed Internet gateway:
Dedicated high-performance Internet gateway
with the option to connect to service provider
by either using on board FE/GbE Ethernet ports
or traditional WAN PA in one PA slot
• Secure Internet gateway: Support for features
such as IP Security (IPSec) Protocol and stateful
firewall at very high speeds make it an ideal
Internet gateway (security) appliance
•
Key in different enterprise applications:
Master Controller in Optimized Edge Routing
(OER) application, Key server or group member
in Group Encrypted Transport (GET) VPN
application, DMVPN hub, and Cisco IOS IP SLAs
• Ideally suited as a low cost route reflector with
its ability to hold one million routes with its
1 GB of memory
By enabling the multifunction capabilities of
the Cisco 7301 router, customers can simplify
their network architectures, significantly reduce
initial equipment costs, and increase revenue
opportunities through value-added services .
Series Specifications
Flash Memory 64 MB (expandable to 256 MB)
System DRAM Memory 256 MB (expandable to 1 GB)
Modular Slots 1-port/service adapter slot
Supported Port Adapters 70+
Internal Power Supply
AC or DC, dual option
Dimensions (H x W x D) 1 .73 in . x 17 .3 in . x 13 .87 in . (4 .39 cm x 43 .9 cm x 35 .23 cm)
Performance
Up to 1 Mpps
Console Port 1
Auxiliary Port 1
Base Configuration: Cisco 7301 Includes the network processing engine NPE-G1, 3 fixed
10/100/1000 ports (can accommodate any one of the port adapters
that are supported on the Cisco 7200 VXR series) with AC Power
Supply . 256 MB of DRAM and 64 MB of Flash, and IP Software
Maximum Ethernet Ports
Cisco 7301
5
Maximum High-speed Serial
(up to 52 Mbps)
Cisco 7301
1
Maximum Low-speed Serial
(up to 1 Mbps)
Cisco 7301
8
Voice/Data Support Yes
Integrated Modems No
Integrated CSU/DSU
Yes (dependent on port adapter configuration)
Compression Supported in software
Encryption
Supported in hardware (with SA-VAM2+)
Redundant Power Supply Support Yes, for AC or DC
Minimum Cisco IOS Release
12 .2(14)S, 12 .2(14)SU, 12 .2(15)T, 12 .1(14)E, 12 .3(1), 12 .3(2)T, 12
.0(28)S, 12 .3(1a)B, 12 .4T and later Cisco IOS releases
Weight
Chassis fully configured with a port adapter 10 .5 lb
approximately (4 .76 kg)
Heat dissipation 50W (170 BTU typical, 75W (255 BTU) maximum
Power dissipation
75W maximum configuration
Temperature 32 to 104°F (0 to 40°C), operating;
–4 to 149°F (–20 to 65°C), nonoperating
Humidity
10 to 90% humidity noncondensing
Ordering Information
CISCO 7301 BUNDLES AND OTHER PART NUMBERS
Product Number Product Description
SECURITy
CISCO7301/
2+VPNK9 Cisco 7301, VAM2+, AC power, 512 MB system memory, SDM
BROADBAND
CISCO7301-BB Cisco 7301, 512 MB Memory, 16k License, 64 MB Flash, AC power, IP/IOS
CISCO7301-BB-8K
Cisco 7301, 256 MB SDRAM, 8K Sub Broadband Feature License
CISCO7301BB-1g Cisco 7301, 1 GB Memory, 64 MB Fl, AC power, IP IOS,
up to 16k Sub BBA License
CISCO7301BB-8K-1g Cisco 7301, 1 GB Memory, 64 MB Fl, AC power, IP IOS,
up to 8k SubBBA License
VOICE
CISCO7301/ITP/BUN ITP Signaling Gateway Bundle
BASE CHASSIS
CISCO7301 Cisco 7301 Chassis, 256 MB memory, AC power, 64 MB Flash
CISCO7301-2AC= Cisco 7301 Chassis with Dual AC power supply spare
CISCO7301-2DC48= Cisco 7301 Chassis with Dual DC 48 power supply spare
POWER SUPPLIES
PWR-7301-AC Cisco 7301 Chassis, 256 MB memory, AC power, 64 MB Flash
PWR-7301/2-AC Cisco 7301 Dual AC power supply option
PWR-7301/2-DC48 Cisco 7301 Dual DC 48 power supply option
MEMORy OPTIONS
MEM-7301-1gB= 1 GB memory upgrade for Cisco 7301