EN
- 20 -
PROCEDURE
SIGNAL
4 Changing the length of the user code
It is possible to change the length of the user code only if no codes have been set. If codes have already
been set, repeat the procedure described in point 3. “Deleting all user codes”.
4.1. Press the CISA key to activate the keypad;
It is automatically backlit.
4.2. Enter the 8-digit Master Code;
A short beep will be heard and the
symbol will flash
green once. The yellow programming LED will come on.
4.3. Press 4;
The
symbol will flash green once and a short beep will
be heard.
4.4. Enter the desired numbers (from 4 to 8).
The
symbol will flash green twice and two short beeps
will be heard if the operation is successfully completed.
5 Changing the Master Code
5.1. Press the CISA key to activate the keypad;
It is automatically backlit.
5.2. Enter the 8-digit Master Code;
A short beep will be heard and the
symbol will flash
green once. The yellow programming LED will come on.
5.3. Press 5;
The
symbol will flash green once and a short beep will
be heard.
5.4. Enter the new Master Code;
The
symbol will flash green once and a long beep will
be heard.
5.5. Re-enter the Master Code;
The
symbol will flash green twice and two short beeps
will be heard if the operation is successfully completed.
6 Disabling/enabling the remote control
6.1. Press the CISA key to activate the keypad;
It is automatically backlit.
6.2. Enter the 8-digit Master Code;
A short beep will be heard and the
symbol will flash
green once. The yellow programming LED will come on.
6.3. Press 6.
The
symbol will flash green twice and two short beeps
will be heard if the operation is successfully completed.
7 Selecting automatic mode
7.1. Press the CISA key to activate the keypad;
It is automatically backlit.
7.2. Enter the 8-digit Master Code;
A short beep will be heard and the
symbol will flash
green once. The yellow programming LED will come on.
7.3. Press 7.
The
symbol will flash green twice and two short beeps
will be heard if the operation is successfully completed.
8 Changing the Passage code
8.1. Press the CISA key to activate the keypad;
It is automatically backlit.
8.2. Enter the 8-digit Master Code;
A short beep will be heard and the
symbol will flash
green once. The yellow programming LED will come on.
8.3. Press 8.
The
symbol will flash green once and a short beep will
be heard.
8.4. Enter the new Passage Code;
The
symbol will flash green once and a long beep will
be heard.
8.5. Re-enter the Passage Code;
The
symbol will flash green twice and two short beeps
will be heard if the operation is successfully completed.
