VCC-G60FV11CL
Rev.900-684-34
©2014 CIS Corporation. All rights reserved.
4
The voltage ripple of camera power DC +12V
±
10% shall be within
±
50mV. Improper power
supply voltage may cause noises on the video signals.
The rising time of camera power supply voltage shall be less than +10V, Max 60ms. Please
avoide noises like chattering when rising.
2ch output CCD, separated into right and left, is utilized for VCC-G60FV11CL. Image signals for
right half screen and left half screen are output via each independent circuit. Therefore, differences
between right screen and left screen could be seen depending on the usage conditions (shooting
conditions /temeperature conditions and so on). CIS trys its best to adjust this differences but please
be noted it would not be perfect.
3. Product Outline
VCC-G60FV11CL is a Camera Link interfaced, high-resolution industrial black and white video camera module
utilizing a 2/3 type PS IT CCD. 5M pixels CCD image sensor with on-chip micro-lenses realizes high
sensitivity and high resolution. At Full Frame Scan Mode, entire pixels can be read out within approx. 1/16s.
Features
□
Camera settings can be changed via serial communications.
□
Shutter speed can be set from 1/16sec
～
1/100,000sec by 1H.
□
At partial scan mode, both capturing start position and capturing width can be set by 3H.
10
40
20
30
50
10
11
12
[V
]
Voltage Rising Time [ ms ]
9
8
7
60
70
P
ow
er
S
up
pl
y
V
ol
ta
ge
