![background image](http://html1.mh-extra.com/html/cis/cis-sw-poe4/cis-sw-poe4_quick-setup-manual_2608763003.webp)
CIS—SW
-
POE4
PoE Output
The CIS
-
SW
-
POE4 provides PoE output on ports ETH2—ETH5. It can provide passive PoE, as well as 802.3af/
at output.
•
The output voltage will be the same as the input voltage.
•
The maximum power output of each port is 1A. The total power output of the router is 2A
•
It is recommended to use the optional 48V adapter. 802.af/at provides 30W per port, while the
device uses 8W itself.
Reset Button
This button is located on the side next to the USB port. Hold this button while the device is powered off,
then apply power. Keeping holding until the USR LED light starts flashing, (5 seconds) then release the
button to reset to the default CIS configuration. You can use this procedure if you have forgotten the
password to access the device, or simply wish to return the unit to its default configuration state.
Warranty Information
Custom Integration Solutions
™
products have a 2
-
Year Limited Warranty. This warranty includes parts and
labor repairs on all components found to be defective in material or workmanship under normal condi-
tions of use. This warranty shall not apply to products that have been abused, modified, or disassembled.
Products to be repaired under this warranty must be returned to Custom Integration Solutions
™
or a des-
ignated service center with prior notification and an assigned return authorization (RA) number.
Contact Information Web: www.custom
-
integration
-
solutions.com
Phone: Technical Support
-
(888) 976
-
3651
The CIS
-
SW
-
POE4 is in compliance with the essential requirements and other relevant pro-
visions of Directive 2014/53/EC.