background image

Head Office

100 Silverwater Rd, Silverwater NSW 

2128, Australia

Postal Address

PO Box 7138, Silverwater NSW 1811, 

Australia

1800 012 681   

WWW.CIRTEX.COM.AU

CIRTEX INDUSTRIES PTY LTD

DISCLAIMER

All information provided in this document is correct to 
the best knowledge Cirtex Industries Pty Ltd (“Cirtex”) 
and is given out in good faith. While every effort has 
been made to ensure the accuracy of the information 
in this catalogue, Cirtex assumes no responsibility 
for errors or omissions or for any consequences of 
reliance on this catalogue. The information presented 
herein is intended only as a general guide to the use 
of such products and no responsibility or liability is 
accepted by Cirtex for any loss or damage however 
arising, which results either directly or indirectly 
from use of such information. Cirtex has a policy of 
continuous development therefore information and 
product specifications may change without notice. This 
document is subject to copyright in its entirety. The 
contents may not be reproduced in any form, either 
in whole or in part, without written permission from 
Cirtex. Copyright 2021. All rights reserved.

Summary of Contents for T-RECS






Reviews: