8
B. Assembly Instructions
1.
Assemble the MRI Body/Viewray Torso Coils supports and
MRI Body crossbars using the alignment pins and
corresponding holes (circled in blue) and secure in place with
the black ½-13 hex nylon screws. Pair the MRI Body/Viewray
Torso Coils support with the corresponding MRI Body
crossbar, which can be identified by their labels (circled in
red).
Note: Throughout this user manual “Front” and “Back” (for
both MRI Body and actuator) are referring to such that
“Back” is the furthest from the observer when the phantom
is on the couch with the MRI Body toward the gantry and
the observer at the end of the couch. Also, to aid in correct
assembly of the phantom’s parts the
identification/matching labels are affixed only on
observer’s right side.