Cirrus Logic CS2000-OTP, General Description Manual

Page: 17 / 30

CS2000-OTP
DS758F3 17
5.4.6 Ratio Configuration Summary
The R
UD
is the user defined ratio for which up to four different values (
Ratio
0-3
) can be stored in the one
time programmable memory. The M[1:0] pins or
LockClk[1:0]
modal parameter then select the user de-
fined ratio to be used (depending on if static or dynamic ratio mode is to be used). The resolution for the
R
UD
is selectable for the dynamic ratio mode. R-Mod is applied accordingly. The user defined ratio, ratio
modifier, and automatic ratio modifier make up the effective ratio R
EFF
, the final calculation used to deter-
mine the output to input clock ratio. The effective ratio is then corrected for the internal dividers. The fre-
quency synthesizer’s fractional-N source selection is made between the static ratio (in frequency
synthesizer mode) or the dynamic ratio generated from the digital PLL (in Hybrid PLL mode) by either the
FracNSrc
modal parameter for manual mode or the presence of CLK_IN in automatic mode. The concep-
tual diagram in Figure 13 summarizes the features involved in the calculation of the ratio values used to
generate the fractional-N value which controls the Frequency Synthesizer. The subscript ‘4’ indicates the
modal parameters.
Figure 13. Ratio Feature Summary
Referenced Control Parameter Definition
Ratio 0-3................................ “Ratio 0 - 3” on page 23
M[1:0] pins............................. “M1 and M0 Mode Pin Functionality” on page 19
LockClk[1:0] .......................... “Lock Clock Ratio (LockClk[1:0])” section on page 23
LFRatioCfg ............................ “Low-Frequency Ratio Configuration (LFRatioCfg)” on page 24
RModSel[1:0] ........................ “R-Mod Selection (RModSel[1:0])” section on page 22
RefClkDiv[1:0] ....................... “Reference Clock Input Divider (RefClkDiv[1:0])” on page 24
FracNSrc ............................... “Fractional-N Source for Frequency Synthesizer (FracNSrc)” section on page 23
Effective Ratio R
EFF
Ratio Format
Frequency Reference Clock
(CLK_IN)
SysClk
PLL Output
Frequency
Synthesizer
Digital PLL &
Fractional N Logic
R Correction
N
Ratio 0
Ratio 1
Ratio 2
Ratio 3
12.20
20.12
12.20
only
M[1:0] pins
LockClk[1:0]
4
LFRatioCfg
Ratio
Modifier
RModSel[1:0]
4
Ratio
Modifier
Auto Selection
(CLK_IN sense)
Manual Selection
(
FracNSrc
4
or M2 pin)
R Correction
RefClkDiv[1:0]
Timing Reference Clock
(XTI/REF_CLK)
Divide
RefClkDiv[1:0]
Static Ratio
Dynamic Ratio
User Defined Ratio R
UD
M2 pin force Manual
or
M[1:0] pins
=? LockClk[1:0]

=
M2 pin