Cirrus Logic CDB47xxx User Manual Download Page 33 | Manualshive

Page: 33 / 86

background image

3-1

Copyright 2012 Cirrus Logic, Inc.

DS886DB9

Installation, Setup, and Running First Application

CDB47xxx User’s Manual

Chapter 3

Installation and Setup of Development Board Software

3.1 Installation, Setup, and Running First Application

It is important to install the CDB47xxx Board software

before

connecting the USB cable

from the PC to the USB port of the CDB47xxx Board. Failure to install the evaluation

software before the initial connection can result in an inability to communicate with the

CDB47xxx.

3.1.1 Evaluation Software Installation

The DSP evaluation software installation will first install the Cirrus Logic



DSP evaluation software

followed by the USB drivers required to communicate with the CDB47xxx board.
1. Run the latest DSP evaluation software installation executable (cirrus_dsp_eval_<ver>.exe or

cirrus_dsp_sdk_<ver>.exe). This executable is supplied by your Cirrus Logic representative.

2. At the

Welcome

screen, click

Next.

3. At the Cirrus Logic

Licensing Agreement

window, select the

“I accept the agreement”

radio button to

agree to the terms and then select

Next.

4. Select the default destination directory suggested by the installer for downloading the evaluation kit

files.

5. Select the default directory suggested by the Installer for storing the shortcuts to the programs and

files you are downloading.

6. Press the

Install

button to begin the installation process.

7. Press the

Finish

button to complete the installation process.

3.1.2 Setting up the CDB47xxx Board with a DVD Player

Follow these steps to set up the CDB47xxx Board
1. Place the CDB47xxx and the CDB47XXX-DCxx daughtercard on a static-free surface.

2. If the boards are not connected, connect them together as shown in

3. Connect the power supply jack to the CDB47xxx Board at J2 and the adapter to a wall power socket

or to a power strip.

Note:

Never connect the power supply without the daughtercard being connected to the main board.

The switching regulators on the main board rely on voltage sensing paths provided by the

daughtercard. Opening these paths will cause the regulator ouput to reach potentially damaging

voltages.

4. Ensure that the D14 (blue), D7 (green), D8 (yellow), and D9 (red) power indicator LEDs on the

CDB47xxx illuminate when power is applied to the board.

«
...
31
32
33
34
35
...
»

Summary of Contents for CDB47xxx























































































Reviews:

No comments

Related manuals for CDB47xxx

Brand: Linear Pages: 10

Brand: TYAN Pages: 67

Brand: AOpen Pages: 8

Brand: IEI Technology Pages: 140

H470 AORUS PRO AX

Brand: Gigabyte Pages: 52

Brand: Analog Devices Pages: 8

Brand: Linear Technology Pages: 8

Brand: Aaeon Pages: 78

Brand: Zamel Pages: 3

Brand: TRU Components Pages: 4

Brand: ST Pages: 52

Brand: ON Semiconductor Pages: 5

Brand: IEPC Pages: 9

Brand: IEI Technology Pages: 43

Brand: MiTAC Pages: 84

Brand: SOYO Pages: 102

SY-KT333 DRAGON Plus

Brand: SOYO Pages: 112

Brand: Abit Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands