Cirronet SEM2411 /SEM2411 X, User Manual

Page: 14 / 40

SEM2411
The remote radio assembly has mounting holes to secure the antenna. The antenna is attached to
the remote radio through the included 24-inch RF cable. If the antenna is not to be mounted on
the remote radio assembly, connection between the remote radio and the antenna must be made
with high-quality , loww-loss RF cable. Cirronet recommends limiting the length of the RF cable
to 5 feet to minimize RF signal loss.
Note that the remote radio assembly should be mounted on a tower or building top oriented as in
Figure 7. It is important that the RF connector on the remote radio assembly point to the ground
to avoid any issues with rain water.
Attaching Data/Power Cable Connector – X Model
The figure below shows the pin numbering of the Data/Power connector. The view provided is
looking into the side of the connector into which the pins will be inserted.
The cable pins are installed by choosing the appropriate conductor color and connector hole
location and inserting the pin into the hole until it “clicks” into place. Verify the pin is locked
into place by gently pulling on the conductor.
If a pin is installed in the wrong connector location, use the extractor tool to remove the pin.
Insert the extractor tool into the connector hole such that the tool surrounds the pin. Gently push
the extractor tool completely into the hole. Remove the pin by gently pulling on the conductor. If
the pin does not come out easily, it is an indication the tool is not fully inserted. Do not pull on
the conductor forcefully as that can pull the conductor out of the pin.
Use the following color code to insert the pins into the connector:
CONNECTOR
PIN
CONDUCTOR
COLOR CONNECTOR
PIN
CONDUCTOR
COLOR
1 Brown 9 Green
2 Orange/Black 10 Orange
3 Black 11 Violet
4 Blue 12 Yellow
5 Tan 13 White/Black
6 Pink 14 Grey
7 White 15 White/Red
8 Red
Care must be taken to follow the color code correctly. An incorrectly assembled connector can
damage the radio or the card or both.

2000- 2004 Cirronet

Inc 8 M-2411-0007 Rev B