Introduction and Setup Page 4
Installing the Software
If you have an older version of easy-wire already installed, complete steps 1-3 below. Then in step 4
double- click on RemoveCirrisSoftware.exe to remove the software and install the new version.
Step 1
Exit all running Windows applications.
Step 2
Insert the Cirris thumb drive into a USB port on
your PC.
Step 3
The Windows
“AutoPlay” screen will open.
Click “Open folder to view files”.
Note:
If the
“AutoPlay” screen does not open, navigate to the removable disk drive on your
computer.
Step 4
Double-click on
Easy-wireStation_2011.3.01900_Install.exe
.
Step 5
Complete the installation as prompted.
When prompted to choose a destination
location, use the provided default location.
